Industrial Boiler Manufacturer in Pakistan

AGK Bio Energy Solutions (Pvt.) Ltd. started in Sahiwal in 2002 as Amir Ali Trading Company. Today, as part of AGK Group, we design, fabricate, install and service industrial boilers for factories across Pakistan. As a local boiler manufacturer in Pakistan, our engineers and spare parts are close to your plant, so help is never far away.

Industrial Steam Boilers We Build

Whether you need a small boiler for a dyeing unit or a large water tube boiler for a textile mill, we have a proven design for your load and fuel.

• Biomass boiler: runs on rice husk, wood chips, cotton stalks and bagasse, 3 to 25 TPH
• Fire tube boilers: three-pass package design for coal and biomass, 3 to 25 TPH
• Water tube boilers: high capacity and pressure, 10 to 30 TPH
• Gas and oil fired boilers: clean and quick steam
• Thermal oil heaters: high temperature at low pressure, 5 to 14 MKcal
• Waste heat recovery boilers: free steam from engine and turbine exhaust, 5 to 10 TPH

Biomass Boiler: Lower Your Steam Cost

A biomass boiler lets your factory make steam from local fuel that you can buy from nearby suppliers. Rice husk, wood chips and cotton stalks are available across Punjab and Sindh, and they usually cost much less per ton of steam than gas or furnace oil.

AGK has built biomass boilers for many years. We know how each fuel burns, and we design the furnace, grate and dust collector to match. This is why our biomass boilers give steady steam and clean stacks.

Rising Gas Costs and Your Steam Bill

For many factories, steam is one of the largest running costs after raw material and labour. Gas tariffs and levies for industry have gone up again and again, and supply is often cut in winter. This is why more plant owners are asking a boiler manufacturer in Pakistan for practical ways to depend less on gas.

• Switch the main load to biomass: keep your gas boiler as a standby and run a biomass boiler for daily steam.
• Recover waste heat: use engine or heater exhaust to make extra steam.
• Improve the boiler house: economizers, condensate return and burner tuning can cut fuel use.
• Outsource steam: let AGK supply steam so you avoid a large investment.

Steam Without Buying a Boiler

Some factories do not want to invest in a boiler house or manage fuel and staff. For them, we offer biomass steam supply. AGK builds the steam plant at your site, arranges the fuel, provides trained operators and handles all maintenance. You simply use the steam.

Why a Local Boiler Manufacturer Matters

A boiler runs for many years. During that time you will need spare parts, service visits and sometimes urgent help. Choosing a boiler manufacturer in Pakistan is also choosing a service partner. With AGK, our engineers can reach your site quickly, parts are available without long import delays, and you talk to people who understand your fuel, your water and your working conditions.

• Installation, commissioning and operator training
• 24/7 boiler services and yearly AMC contracts
• Genuine boiler spare parts from local stock
• Upgrades and fuel conversion through our boiler engineering services

Clean Stacks and EPA Compliance

Punjab faces serious smog every winter, and industrial emissions are checked more closely than before. Every AGK boiler can be supplied with multi-cyclone dust collectors, bag filters or wet scrubbers, so your plant meets the standards of the Environment Protection Department Punjab. We also train operators to control fuel and air properly, which reduces smoke and saves fuel at the same time.

How to Choose the Right Boiler for Your Factory

Many factory owners are not sure where to start. These five questions make the choice much easier, and our engineers will help you answer each one during a free first discussion.

1. How much steam do you need? Add up the steam used by all your machines, in kg per hour or TPH. Leave a margin for future growth.
2. At what pressure? Your process machines decide the working pressure. Higher pressure needs a stronger boiler design.
3. Which fuel is cheapest and easiest to buy? In most of Punjab, rice husk or wood chips are the lowest cost. Gas is clean but costly and not always available.
4. How many hours will it run? Plants that run 24 hours a day benefit most from automatic feeding, chain grate firing and an economizer.
5. How much space do you have? Biomass and coal boilers need room for fuel storage and a dust collector.

With these answers, we can recommend the right boiler type, capacity and firing system. For small and medium loads, a fire tube boiler is often the simple choice. For large loads and high pressure, a water tube boiler is better. If you want to avoid the investment altogether, steam supply may be the best fit.

Built for Pakistani Fuel, Water and Weather

Imported boilers are often designed for clean, uniform fuel. Pakistani plants face something different: rice husk with high ash, wood with changing moisture, coal of mixed quality, hard water and very hot summers. Our designs are made for these real conditions. Furnaces and grates are sized for local fuel, water treatment is planned for local water, and fans and motors are selected for hot weather. This practical approach keeps your boiler running when it matters most.

Industries We Serve

• Textile, dyeing and finishing
• Food and beverage
• Edible oil and ghee
• Dairy plants
• Rice and feed mills
• Paper and packaging

These plants rely on our boilers every day. See some of our completed boiler projects in Pakistan.

Training Your Boiler Operators

A good boiler needs good operators. With every new boiler, our engineers train your team on safe start-up, daily checks, water testing, fuel and air control, blowdown and emergency shut-down. We give simple written instructions in English and Urdu, so new operators can learn quickly. Well-trained operators use less fuel, avoid breakdowns and keep the boiler house safe for everyone.

How We Work

1. Site visit: our engineers check your steam load, pressure, fuel and space.
2. Design and quote: you get a clear proposal with capacity, firing system and scope.
3. Fabrication: the boiler is made and pressure-tested.
4. Installation: our team installs and commissions the complete system.
5. Support: service, AMC and spare parts keep your plant running for years.

Boiler Manufacturer in Pakistan: FAQs

Where is AGK based?

Our office is on Arifwala Road, Sahiwal, Punjab. We serve factories across Pakistan.

What boiler sizes do you make?

Industrial steam boilers from 3 TPH up to 30 TPH, thermal oil heaters from 5 to 14 MKcal and waste heat recovery boilers from 5 to 10 TPH.

Which fuel is cheapest for steam?

For most plants, local biomass such as rice husk gives the lowest cost per ton of steam. Our engineers can compare fuels for your city and load.

Can you convert our gas boiler to biomass?

In many cases, yes. We inspect your boiler first and tell you honestly whether a conversion or a new biomass boiler makes more sense.

Do you provide service after installation?

Yes. We offer 24/7 support, AMC contracts and local spare parts for every boiler we install.

How do I get a quote?

WhatsApp +92 300 4493333 with your steam need (TPH), fuel and city, or contact AGK. Follow our work on Facebook and Instagram.