Boiler Projects in Pakistan

Since 2002, AGK has completed boiler projects for many leading factories across Pakistan. The photos above show some of the boilers we have designed, built, delivered and commissioned. Each of these boiler projects was planned around the client’s steam load, fuel and site, and many of these plants still run with our service and spare parts support today.

Types of Boiler Projects We Deliver

• New boiler houses: complete steam plants with boiler, fuel feeding, dust collector, chimney, water treatment and piping.
• Boiler replacement: removing old, unsafe or inefficient boilers and installing new ones with minimum shutdown.
• Fuel conversion: converting gas or oil boilers to biomass or coal to cut fuel cost.
• Capacity expansion: adding new boilers or upgrading existing ones when production grows.
• Biomass steam supply sites: plants that AGK builds and runs 24/7 at the client’s factory.
• Emission control: adding multi-cyclone dust collectors and scrubbers to meet EPA rules.

Industries in Our Boiler Projects

Our boiler projects cover a wide range of industries. Each sector uses steam in a different way, so each project is designed differently.

• Paper and board mills: steam for drying cylinders and corrugators
• Textile and apparel: steam for dyeing, washing and finishing
• Edible oil and ghee: steam and thermal oil for refining and deodorizing
• Rice mills: steam for parboiling, often with rice husk fired boilers
• Feed mills: steam for conditioning and pelleting
• Dairy and beverages: clean steam for processing and bottling lines

How We Manage Every Project

1. Survey: our engineers study the steam load, fuel, pressure and available space.
2. Design: we prepare the boiler design and layout drawings.
3. Fabrication: pressure parts are made and hydro-tested before dispatch.
4. Delivery: the boiler and auxiliaries are transported safely to site.
5. Installation: our site team erects the boiler, piping, chimney and controls.
6. Commissioning: we test the plant under load and train operators.
7. Handover and support: service, AMC and spare parts after start-up.

What Clients Get from AGK Boiler Projects

• One team responsible from design to commissioning
• Boilers designed for local fuels and conditions
• Clean stacks with proper dust control
• Trained operators and clear documents at handover
• Local engineers and boiler spare parts for long-term support

Start Your Boiler Project

Planning a new boiler or an upgrade? Tell us your steam need, fuel and city, and our engineers will suggest the best option. Explore our biomass boiler, industrial boilers and biomass steam supply pages, or contact AGK on WhatsApp at +92 300 4493333. See more project photos on our Facebook page.

Boiler Projects by Fuel Type

The fuel decides most of the design in every project. Over the years our team has delivered plants for almost every fuel used by Pakistani industry.

Biomass Boiler Projects

Rice husk, wood chips, cotton stalks, corn cobs and bagasse are now the most popular fuels for new boilers in Punjab. Our biomass projects include the boiler, fuel storage shed, conveyors, ash handling and multi-cyclone dust collectors. Many rice mills, feed mills and textile units now run fully on local biomass.

Coal Fired Boiler Projects

Coal gives strong, steady heat and is still used by many large plants. In coal projects we focus on chain grate firing, good combustion air control and proper dust collection, so the plant meets EPA standards.

Gas and Oil Fired Boiler Projects

Food, beverage and dairy plants often use gas or oil for clean steam. Many of these clients later add a biomass boiler to cut fuel cost and keep the gas boiler as a standby.

Thermal Oil and Waste Heat Projects

For textile stenters, edible oil deodorizers and board presses we install thermal oil heaters. On plants with gas engines, waste heat recovery boilers turn exhaust heat into free steam.

Safety and Quality on Every Site

Every boiler project follows clear safety steps. Pressure parts are hydro-tested before dispatch. On site, our team follows safe lifting, welding and hot-work rules. Before handover, we test all safety valves, water level controls and alarms in front of the client’s team. Operators are trained on daily checks, safe start-up and emergency shut-down.

Steam Supply Projects

Some of our most important projects are steam supply sites. Here AGK does not just build the plant, we also run it every day. Our team manages fuel, operation and maintenance, and the client receives steady steam for production. These projects show our confidence in the boilers we build. Learn more on the biomass steam supply page.

What You Receive at Handover

A good project does not end when the boiler starts. At handover, every client receives a clear set of documents and training so the plant can run safely from day one.

• General arrangement drawings and piping layout
• Hydro-test reports for pressure parts
• Operation and maintenance manual in simple language
• List of recommended spare parts
• Training records for boiler operators
• Contact details for our service team and spare parts desk

After handover, our engineers stay in touch. Many clients choose a yearly AMC so that the plant is checked regularly and small issues are fixed before they become big breakdowns.

Boiler Projects FAQs

Can you show us a running boiler before we order?

Yes. Where clients allow, we can arrange a visit to a running plant so you can see our work.

How long does a boiler project take?

It depends on capacity and scope. Our team shares a clear schedule with every quotation.

Do you take responsibility for civil work?

We provide the foundation drawings and loads. Civil work can be done by your contractor or arranged with our guidance.